Volvo Penta

Volvo Penta Exploded view / schematic Repair Kits

Volvo Penta Exploded view / schematic Heat Exchanger, Components

The Thermostat Housing - Volvo Penta (3589553) is an OEM Volvo Penta thermostat housing for multiple Volvo Penta marine engines. This item is for a thermostat with a 1 7/8 inch outside diameter. The...

Volvo Penta Exploded view / schematic Cooling System, Induction- and Exhaust Manifold: MD2BHYThis product replaces:858640

The requirement for thrust washers arose practically as soon as the wheel was established in antiquity. When the bearing that handles the radial load, such as a bushing or roller bearing, does not...

The purpose of thrust washers is to make sure you have enough space between the gearcase and the prop hub. They ensure that the prop and driveshaft splines have enough room to connect. The thrust...

Are you tired of having a loose bolt? Have you already tried putting adhesive, but you can still hear some vibrations? No washers or not using high-quality washers may result in shifting or movements...

The TIMING HARNESS 3.0LX 885163 is required to put the distributor into base sync mode. Over time, the belt stretches and wears down because it operates under intense heat, pressure, and speed. The...

Volvo Penta Exploded view / schematic Propeller Tool Kit

Tool(V2) - Volvo Penta (3849650)

30 mm socket wrench for replacing aft propellers on Duoprop® SX, DP-S and DPX drives.This product replaces:3862808-7

Tooth lock washers have teeth-like serrations on the inside or outside, similar to serrated washers. They go between the bolt head/nut and the mating surface, and the bolted joint is secured the same...