CWR

Life-Calk Solvent & Cleaner - 16ozCleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or Teak Deck Sealant. Safe for fiberglass. Removes uncured polysulfide sealant and grease from tools and equipment. Acetone free formula. ...

XD Flag PoleSpecifications:• 42” Rod Holder Flag Pole• Holds two 12” sandbar flags or one 20”x 24” dive flag• Gimbal butt makes flying in any rod holder a breeze• Made of anodized aluminum• Easy to store

Teak Brite® Advanced Formula Teak Oil - 32ozMost advanced teak oil and sealer available. Will deliver long lasting protection even in tropical climates. Penetrates deep into wood (dry wood only) to feed and protect finish. Compatible with...

Teak Brite® Powder Cleaner - Jumbo - 64ozOne-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready for teak oil sealer application. Designed for decks, swim...

Locking Collar Kit for RealVision 25-PinRaymarine Spare RealVision 25-pin locking collar kit

Element-Proof Field/Ammo Box - Large with TrayFeatures:Interior dimensions: 12.5" x 6" x 8.5"Exterior dimensions: 15" x 8" x 10"Lift-out trayTop-access storageBrass-bailed latchHeavy-duty handleWater-resistant O-ring sealDesigned to fit .50 caliberHolds...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.