Transducer - Thru Hull

Freq. Khz Power Beam Width (°) LF//HF (-3dB) Max Depth (ft) Septh,Speed,Temp # of Pins Supported Deadrise / Transom Angles 77/200 500W 45/15 900 Depth,Temp 8 16-24° Deadrise

This bronze ( B117), thru-hull mount transducer provides depth and temperature. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-7° deadrise angle.

This 8-pin pastic, thru-hull mount transducer provides depth and temperature. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-7° deadrise angle.

This 8-pin bronze, thru-hull mount transducer with 12° tilt provides depth and temperature. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 8-15° deadrise angle.

This 8-pin bronze, 20° tilted thru-hull mount transducer provides depth and temperature. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle.

ST800/B120 Bronze Low Profile Through Hull speed and temperature transducer. For ST70/ST60+/ST290 Instruments.   Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: wood and fiberglass Cable: 45 ft cable Hole...

ST300/P371 Plastic Low Profile Through Hull Speed Transducer. For use with ST40 Instruments. Speed and Temp only. 200 kHz.

P7 Plastic Low Profile through hull depth transducer. For use with ST40 Instruments. Depth only. 200 kHz. 30' cable

P19 Plastic Low Profile through-hull transducer. 200 kHz. For ST70/ST60+/ST290 Instruments. 45 Feet of cable. Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: aluminum, and fiberglass Cable: 45 ft cable Hole...

Longer stem for hulls with steep deadrise or thicker cored hulls. Compatible with the following sounder modules: DSM30 DSM300 Compatible hull material: wood and fiberglass Max Power: 600 watts Frequency: 200/50 kHz Cable: 30ft (10m) cable with...

If a thru-hull flush-style transducer is called for, the Tilted Element 525T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 525T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both of...

If a thru-hull flush-style transducer is called for, the Tilted Element 525T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 525T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both of...