Propellers

A new hub kit collection is now out in the market. With its promising quality, Turning point provides MasterGuard with the best products with a lifetime warranty. The latest and improvised hub kit is right in front of you. Quality and top-grade...

Heads up for a great deal! Turning Point provides MasterGuard with the best installation kits and props housings for engines 6-300+hp in town! Turning Point's MasterGuard Hubs survive regular wear and tear over time without spinning or failing under...

The shock caused by shifting is absorbed by the rubber inner bushing inside an outboard propeller hub. A reducing bushing, also known as a reducer bushing, is used to decrease or increase the size of a pipe thread. Nylon Bore Reducers are a fast remedy...

The purpose of thrust washers is to make sure you have enough space between the gearcase and the prop hub. They ensure that the prop and driveshaft splines have enough room to connect. The thrust gives a hard surface for the splined sleeve so the proper...

POLAFLEX HUB (F41) is well-made from rubber (not plastic) to facilitate softer gear shifting, lessen vibration, and enhance impact deflection. Instead of using aluminum like cheaper models, they have robust brass or bronze splines. To build propeller...

A Devilfish (E01900) is a brass sleeve cutlass bearing that provides a wear surface between propeller shafts and struts or rudder shafts & rudder ports. Designed to have a rubber oil-resistant shaft and is chemical resistant. The rigid outer shell is...

The 9X10 A3R PROP HUSTLER has blades that resist flex for improved fuel economy and performance. This three-blade propeller features extended blade surfaces, cupping, and enhanced geometry for great all-around performance. These props will complement...

The 9X9 A3R PROP HUSTLER is a high-quality prop that is perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. The 9x9 A3R Prop Hustler will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine...

The 9X10 A3R PROP HUSTLER weighing 2.80 LBS material aluminum is great for boaters. The 9X10 A3R PROP HUSTLER will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engines. The 9X10 A3R PROP HUSTLER is manufactured in a cast aluminum...

The shock of shifting is absorbed by a 1 3/4" to 1 3/8" NYLON (NB12) bushing inside an outboard propeller hub.. Should you hit something, the bushing acts as a "breakaway," allowing the prop to spin and safeguarding drive train components such as gears...

The 1 3/4" X 1 1/2" NYLON (NB13) is a high-quality nylon propeller bore reducer. It's a fast remedy for a propeller that's bored too big for the job. It comes complete with a brass step key. The nylon bushing appears to be adequate for low-horsepower...

Turning Point Hub Kit with 17 splines is the only company offering MasterGuard® Installation kits and prop housings with a Lifetime Warranty Hub for engines of 6-300+ horsepower. When purchasing replacement propeller housing, boaters can save up to 33%...