Cooling

This product replaces:840080461175

Yamaha Outboard Water Pump Repair Kit, Includes Impeller, Insert Cup, Plate, Seals and BoltsThis product replaces:6A1-W0078-02-00, 6A1-W0078-02, 47-3462, 808282226565

The WATER PUMP HOUSING J/E 18-3336 is a high-quality Water Pump Housing for Johnson/Evinrude Outboard application. This water pump housing is one of the important components that will help rebuild your water pump. It makes the job easier, quicker, and...

Body Assembly-Water Pump is a rotating shaft with a bearing section that connects to a driving connection and a sealing portion that connects to an impeller end where a water impeller was placed. The housing is molded around the bearing to create an...

Wave washers are used to lessen the stress caused by axial compressive pressures by acting as a cushion. The 3, 4, or 6-point contact formed by the waves of the wave washer results in a medium range of deflection and a superior load bearing capability...

Mercury Impeller is a high-quality impeller that is built to OEM standards. The rubber vanes are flexible, and the boat hub rotates on an eccentric within the stainless steel-lined pump housing. The impeller is the heart of the water pump, and it must be...

One of the most vital pieces of your engine is the coolant hose. Engine function will be significantly affected without the coolant pipe, putting the latter in danger of overheating. A cylinder head hose is an output pipe that drains hot coolant from the...

T-STAT J/E - 18-3561 is a cooling system valve that opens or closes in response to the temperature. When closed, the flow of cooling water is stopped, causing the operating temperature to increase. It opens when the temperature rises, allowing coolant to...

Impeller fitting Johnson/Evinrude Outboard 14-35hp applications is an essential component in determining the performance of a centrifugal pump is the impeller design. An appropriately built impeller maximises flow while minimising turbulence and...

IMPELLER EMP 47-09227 it comprises multiple rubber vanes that are elastic. By transforming mechanical power (energy at the vanes) into output, the flow deflection at the vanes creates pump power. This device provides an inbuilt sucking force and links to...

Part Name: IMPELLER @2Part Class: 0047Status: ACTPack QTY: 2Pack Weight: .032 LBSMetric Unit Weight: .015 KGUPC: 745061715714Unit Lenght: 5 INUnit Width: 1.625 INUnit Height: 2 INMetric Unit Length: 12.699 CMMetric Unit Width: 4.127 CMMetric Unit Height:...

If the impeller is unused for several months, the blades will corrode, and may potentially become stuck and fall off when the engine starts up. The marine environment makes the impeller wear much faster in saltwater conditions. The IMPELLER EMP 47-02172...