Icom

Icom M400BB Black Box VHF With HM195 Black

(No reviews yet) Write a Review
SKU:
ICOM400BB
UPC:
731797036049
MPN:
M400BB
Condition:
New
MSRP: $439.22
$381.93
— You save $57.29

Description

Black Box Transceiver - Icom Quality. Small Footprint.

Space-saving, two-piece configuration

The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMICIV™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.

New intuitive user interface

The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.

Active noise cancelling

The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

10W Loud Audio, Public Address and Foghorn

The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

Common NMEA Interface

When connected to an external GPS receiver, current position and time are shown on the COMMANDMICTM display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with MA-500TR

When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.

Additional features include
  • MarineCommander™ compatible
  • AquaQuake™ water draining function
  • IPX7 submersible protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes)
  • Dual/tri-watch function for monitoring Ch.16 and/or call channel
  • Priority and normal scan
Specifications
General
Frequency Range
Tx
Rx
Ch. 70
156.025-157.425MHz
156.050-163.275MHz
156.525MHz
Usable channel groups INT, USA, CAN and WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC)
Power supply requirement 13.8V DC nominal
(11.7-15.9V DC)
Current drain (at 7.4V DC)
Tx (at 25W output)
Rx (Max. audio)
 
5.5A Max.
3.5A Max.
 
Operating temperature range -20°C to +60°C; -4°F to +140°F
Antenna Impedance 50Ω (SO-239)
Dimensions (W H D)
IC-M400BB
HM-195B/SW
216 79 125mm; 8.5 3.11 4.92 in
67.5 144.5 37mm; 2.66 5.69 1.46 in
Weight (approx.)
IC-M400BB
HM-195B/SW
830g; 1.83 lb
400g; 14.1 oz
NMEA in/out formats RMC, GGA, GNS, GLL, DSC, DSE
Transmitter
Output power (Hi/Low) 25W, 1W (High, low)
Max. frequency deviation ± 5.0 kHz
Frequency tolerance ±10ppm
Spurious emissions Less than -70dBc (at 25W)
Receiver
Sensitivity
Main
Ch. 70
 
0.22μV typical (at 12dB SINAD)
-5dBμ emf typ. (1% BER)
Squelch sensitivity
 		 Less than 0.32μV
Adjacent Channel Selectivity
Main
Ch. 70
 
More than 70dB
More than 73dBμ emf (1% BER)
Spurious response
Main
Ch. 70
 
More than 70dB
More than 73dBμ emf (1% BER)
Intermodulation
Main
Ch. 70
 
More than 70dB
More than 68dBμ emf (1% BER)
Hum and noise ratio More than 40dB
Audio output power
 

Internal speaker
External speaker

 
More than 2W (HM-195B/SW)
More than 10W (RX Speaker)

Measurements made in accordance with TIA/EIA 603 and IEC 62238 (Ch. 70 receiver specifications).

Applicable IP Rating
Ingress Protection Standard (IC-M400BB and HM-195B/SW)
Water IPX7 (Waterproof protection
View AllClose

Related Products

Related Products