Bearings/Hubs/Brakes

6.6K Disc Brake Actuator - Tie Down Engineering - Fits 2" Hitch Ball6,600 lbs Capacity, Tie Down Engineering Disc Braking, Surge ActuatorSpecifications:6,600 lbs CapacityFits 2″ Hitch BallFor Use with Disc Brakes

10" Dexter Brake KitNote: No mounting bracket is required for the 5-bolt kit, but a plate will be included in the 6-bolt.Specifications:Calipers: AluminumSize: 10"

10″ Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes:Vented cupped and studded, zinc rotor, and hub assemblyLoaded...

8,500lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle...

20,000lb Capacity Disc Brake Actuator with 2-5/16″ CouplerThe Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle...

2.32" Bearing Protectors & Covers - 2 PackKeeping the wheels of a trailer well lubricated is an important part of towing responsibly. It may not be on the forefront of most users' minds, but a trailer's wheels need to be cared for just like the...

1.78" Bearing Protectors & Covers - 2 PackKeeping the wheels of a trailer well lubricated is an important part of towing responsibly. It may not be on the forefront of most users' minds, but a trailer's wheels need to be cared for just like the...

1-1/16" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The...

3/4" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings...

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out...

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures:1-3/8" x 1-1/16" Tapered5 x 4-1/2" GalvanizedWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of...

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...