Marine Navigation & Instruments

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications:Type: Mounting BracketsBox Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193796177

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60...

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75 Specifications:Type: ToolsBox Dimensions:...

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60 Specifications:Type: ToolsBox...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of...

RayNet(M) to RayNet(M) Cable - 100mmThe RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. Data: EthernetLength: 100mm

Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer...

Spacer Kit for Type T System - 0.51"Features:13mm (0.51")Spacer KitUse with 90° bezelSpecifically for Type T System Specifications:Type: PartsBox Dimensions: 1"H x 5"W x 5"L WT: 1 lbsUPC: 628309133788

Fuel Flow Sensor - 25-500 LPH/6.6-132 GPHFeatures:Operating Temperature: -40°C to 80°C (-40°F to 176°F)Storage Temperature: -65°C to 170°C (-85°F to 338°F)Port Size: 1/4" NPT FemaleCable Length: 1M (3.28 ft)Maximum...